High-loader chassis for Tiny House

The foundation for your mobile home

Modular, flexible, modular - changing lifestyle concepts also require new living concepts. We offer the stable foundation for life
on wheels. Intelligent manufacturing concepts and decades of experience in the production of high-quality
chassis components for trailers guarantee particularly good quality and durability.

Modular frame concept

The modular frame concept allows different body lengths and customised configurations.

Movable axle module

For subsequent adjustment of the nose load at the hitching point, our high-loaders’ axle module is designed to be movable and can be moved in a 40 mm grid.

Patented connection

The positive-locking connection points ensure perfect connections to the chassis. In the area of the body’s contact surfaces, round head screws are used so that only a small interference contour is created.

Long service life

The hot-dip galvanised chassis components guarantee maximum reliable corrosion protection.

Pre-tensioned frame

Less twisting, less or no warping.

Dimensional accuracy

Due to the chassis’s high dimensional accuracy, the body can be prefabricated to fit exactly.

Heavy duty supports

The chassis is equipped with precisely adapted supports. Other AL-KO support systems can be optionally used at the prepared mounting points.

Integrated lighting

Lighting is already integrated in our chassis.


Certificate of conformity EU certificate of conformity for standard assembled chassis is available.

Scope of supply incl.:

  • Corner steadies
  • Loose crank
  • Mudguards
  • Lighting
  • Automatic jockey wheel
  • Tyres:
    • 2-axle = 195/50 R13C
    • 3-axle = 195/55 R10
  • Overrun device Profi V I coupling head
  • Barrel lock
Weight of payload Number of axles Load height upper edge of frame loaded H2 approx. Load height top edge of frame unloaded H1 approx. Loading length L1 Loading width B1 Axle unit movable Total length L2 Total width B2 Weight
2885 kg 2 634 mm 684 mm 5400 mm 2440 mm 7008 mm 2550 mm 615 kg
2845 kg 2 634 mm 684 mm 6000 mm 2440 mm 7608 mm 2550 mm 655 kg
2825 kg 2 634 mm 684 mm 6600 mm 2440 mm 8208 mm 2550 mm 675 kg
2815 kg 2 634 mm 684 mm 7200 mm 2440 mm 8808 mm 2550 mm 685 kg
2765 kg 2 634 mm 684 mm 8400 mm 2440 mm 10008 mm 2550 mm 735 kg
2825 kg 3 540 mm 590 mm 5400 mm 2440 mm 7012 mm 2550 mm 675 kg
2815 kg 3 540 mm 590 mm 6000 mm 2440 mm 7612 mm 2550 mm 685 kg
2795 kg 3 540 mm 590 mm 6600 mm 2440 mm 8212 mm 2550 mm 705 kg
2780 kg 3 540 mm 590 mm 7200 mm 2440 mm 8812 mm 2550 mm 720 kg
2760 kg 3 540 mm 590 mm 7800 mm 2440 mm 9412 mm 2550 mm 740 kg
2740 kg 3 540 mm 590 mm 8400 mm 2440 mm 10012 mm 2550 mm 760 kg
2780 kg 2 634 mm 684 mm 7800 mm 2440 mm 9408 mm 2550 mm 720 kg

High-loader chassis for Tiny House

Moveable axis unit: 2-axle vehicle front approx. 220 mm / rear approx. 580 mm 3-axle vehicle front approx. 200 mm / rear approx. 440 mm


COC stands for"Certificate of Conformity”, also known as an “EC certificate of conformity”. The document is to be attached to each vehicle, which meets the approved type. It therefore needs to be issued with a new purchase. The manufacturer (AL KO) therefore demonstrates that the chassis meets EU standards, and thus has EU type approval. All technical features and data for the vehicle are documented, which are required for the approval, such as: Dimensions and weights, tyre size, components (overrun device, hitch). The COC is conducive to the vehicle registration office for determining technical data required for the approval. It facilitates approval, even if the vehicle needs to be registered in a different EU country. If a chassis does not have a COC, alternatively an individual approval to acquire an operating permit can confirm that the vehicle meets the prerequisites for an approval. The approval must be drawn up by a technical service. Thanks to the COC, AL-KO is an official manufacturer of chassis, which can be immediately approved following delivery.