Carrier systems campers

    Taşıyıcı Sistem VARIO + VARIO LED

    Yük kapasitesi: Araçtaki maksimum yük kapasitesi, araç üreticisine/modeline bağlıdır. Araçta hasar oluşmaması için, aracınızla birlikte izin verilen maksimum yük kapasitesine mutlaka dikkat edilmelidir! Bazı durumlarda, üstyapı üreticisi tarafından araçlara yük taşıyıcıları onaylanmamış olabilir!
    Ödüller

    Açıklama

    Taşıyıcı Sistem VARIO + VARIO LED

    VARIO bisiklet taşıyıcısı modern tasarımı, üstün esnekliği ve kolay kullanımıyla etkileyicidir. Yüksek kaliteli malzemeler sayesinde düşük ağırlığı ve yüksek taşıma kapasitesiyle öne çıkar. İyi düşünülmüş taşıyıcı sistemi, çeşitli taşıma çözümleri için ideal olarak tasarlanmıştır ve 620 mm'den 800 mm'ye kadar uzatılabilen değişken yükleme derinliği sayesinde daha da fazla olanak sunar. Bisikletler ve scooter'lar için kendini kanıtlamış donanım setlerinin yanı sıra Fat Bike'lar ve üç tekerlekli bisikletler için özel donanım setleri de mevcuttur.

    Kolay kullanım sayesinde daha fazla konfor 

    Yukarı katlanabilir taşıma platformu ve otomatik olarak katlanan lamba taşıyıcısı sayesinde VARIO zahmetsiz kullanım sunar. Bu, kullanılmadığında yer tasarrufu sağlar. Tutma kolları ve bisiklet raylarındaki pratik mandallı hızlı kilitler kullanımı çocuk oyuncağı hâline getirir.

    Mükemmel şekilde sabitlenir - kolayca yüklenir 

    Tutma kolları ve bisiklet raylarındaki mandallı hızlı kilitler, bisikletlerinizi bir çırpıda sabitler. Scooter'ınızı en iyi şekilde sabitlemek için, kapsamlı delik düzeni sayesinde tekerlek kelepçeleri scooter rayına uygun şekilde monte edilebilir. Düşük yükleme yüksekliği ve bisikletler ile ağır e-bisikletler için isteğe bağlı olarak sunulan yükleme rampaları, yükleme ve indirmeyi çocuk oyuncağı hâline getirir.

    Kaliteye ve konfora önem veren herkes için idealdir.

    Avantajlarınız:
    • Taşıma kapasitesi: 150 kg'a kadar
    • AT tip onayı mevcuttur
    • Çok sayıda taşıma çözümü 
    • Büyük ölçüde alüminyumdan üretilmiştir
    • Aletsiz çıkarılabilir
    • Yüksek kaliteli, kullanıcı dostu tasarım
    • Standart olarak 620 - 800 mm arasında değişken yükleme derinliği
    • Taşıma platformu katlanabilir + lamba taşıyıcısı otomatik olarak birlikte katlanır 
    • Mandallı hızlı kilitli bisiklet rayları ve tutma kolları
    • Standart bağlantı elemanları dâhildir
    • LED aydınlatmalı versiyonu da mevcuttur (2025'in 2. çeyreğinden itibaren)
    Donanım setleri:
    • Komple sistem 1 scooter
    • Komple sistem 1 scooter + 1 bisiklet
    • Komple sistem 1 scooter + 2 bisiklet
    • Komple sistem 1 Fat Bike + 1 bisiklet
    • Komple sistem 2 Fat Bike
    • Komple sistem 2 Fat Bike + 1 bisiklet
    • Komple sistem 2 bisiklet
    • Komple sistem 3 bisiklet
    • Komple sistem 4 bisiklet
    • Komple sistem 1 üç tekerlekli bisiklet/Tricycle

    SSS

    Due to our experience and know-how, we are able to offer you couplings for most European vehicles. Other vehicles can be customised by us or our service partners. Please observe or check the permissible trailer loads of your vehicle (vehicle documents, COC papers). Alternatively, if the vehicle is not included in the papers, a solution can certainly be found in consultation with the TÜV.
    In order for us to be able to process your process your enquiry as quickly, correctly and without delay, it is necessary that your information is complete. Base vehicle Camper manufacturer Model/trade name Year of construction Chassis number Supplementary information such as water tank, frame extension available, etc. If any information is missing, we will contact you immediately.
    It is an indication of the strength of a towbar. It is calculated according to the following formula: D = G(K) x G(A) x 9.81 G(K) + (A) If G(K) is the permissible total weight of the towing vehicle in tonnes(t) and G(A) is the total weight of the trailer, also in tonnes; e.g. a Fiat Ducato with 3.5 t permissible total weight and a trailer load of 2 t requires a coupling with a minimum D value of: D = 3.5 x 2.0 x 9.81 = 12.50 kN 3.5 + 2.0. However, the actual permissible trailer load depends on the entry under item 28 or O1 in the vehicle documents. Of all the given values, the weakest value is always decisive for approval.
    When it comes to campers, there are many factors to consider in order to be able to assess what can be "carried" by the vehicle. Among other things, the general vehicle data such as rear axle load and total weight must be taken into account to determine the payload capacity. It is also important to clarify the load-bearing capacity of the camper chassis and its possible chassis extension.
    In many cases, an original chassis (e.g. Fiat/Mercedes/etc.) is too short to build a camper. This is why a frame extension is usually necessary. It supports the rear garage or the entire rear area of the vehicle. Since a rear garage with, for example, a 150 kg payload has significantly lower forces than a 2,000 kg towbar or an additional load-carrier, the frame extension must be reinforced with EC-tested components to create a stable connection. For the installation of a towbar or a load-carrier, the reinforcement of the frame extension with corresponding components is mandatory.
    AHK and load-carrier can be combined (use not possible at the same time). Load-carriers can still be used when changing vehicles. Only the vehicle-specific mounts are required. The electric cable set must always be ordered separately (not applicable if a towbar is available).
    The X dimension indicates the overhang of the camper body over the standard chassis. When ordering, please state the dimensions entered in the drawing if your vehicle is not listed in our database. (If in doubt, ask us.) If a tank, storage compartment or similar is fitted to your vehicle in the area labelled "Z", please request a separate dimension sheet by telephone.
    The permissible load of a motorbike carrier on a camper depends on the permissible rear axle load of the vehicle and the technically permissible load of the carrier. It is also important to know which weights the body manufacturer approves for his vehicles in detail. There are different chassis and frame extensions here, which have different load capacities. The following formula can be used to calculate the possible payload: F(L) = permissible load mass F(HA) = difference between permissible (from vehicle registration certificate) and real/weighted rear axle load A = wheelbase B = effective lever arm of the load mass (for a rough calculation it can be assumed that the centre of gravity of the load is approx. 350 mm behind the end of the vehicle). F(L) = F(HA) x A A + B If you want a higher load than calculated, it may be possible to increase the axle load by adding a superimposed load.
    As the user of a load-carrier, you are responsible for the correct securing of the goods being transported. With our universal lashing strap set, optimum load securing is guaranteed for almost every scooter. A scooter is fixed to the handlebar with the help of our holding arm and is thus secured against falling over. Now it can be securely lashed down. For this purpose, wheel brackets are attached to the standard motorbike tub and the tyres are secured with straps. The scooter still has to be pulled tightly into the springs with the tensioning straps. Our load-carriers are equipped with ring eyelets for this purpose. The safe transport of a bicycle or e-bike is ensured with holder bars and wheel trays. Both elements are equipped with comfortable ratchet quick-release fasteners.

    Benzer ürünler

    Panelvanlar ve karavanlar için taşıma sistemleri karşılaştırması

    Caravaning
    Blog

    Panelvanlar ve karavanlar için taşıma sistemleri karşılaştırması

    İster sabah fırına gitmek, ister yakındaki şehirde işlerinizi halletmek ya da çevrede kapsamlı gezi turlarına çıkmak için olsun: Bisikletinizi veya motosikletinizi seyahate yanınızda götürdüğünüzde, tatil yerinde her zaman hareketli ve esnek kalırsınız.

    Devamını oku