Vehicle technology
You are here:Home > Products > Caravan > Parking > Jack

Jack

Safe and Secure jacking

The AL-KO Side Lift Jack is the perfect solution for lifting a caravan to change a wheel, or to fit the AL-KO Secure Wheel Lock. The simple to use, smooth winding operation of the jack allows the caravan to be lifted easily with the minimum of effort.

Your advantage:

  • From the manufacturer of the chassis...
2359771389235

Description

Safe and Secure jacking

The AL-KO Side Lift Jack is the perfect solution for lifting a caravan to change a wheel, or to fit the AL-KO Secure Wheel Lock. The simple to use, smooth winding operation of the jack allows the caravan to be lifted easily with the minimum of effort.

Your advantage:

  • From the manufacturer of the chassis = The perfect solution, an AL-KO product for the AL-KO Chassis.
  • Insert system - Positive engagement via the insert pocket of the mounting bracket prevents sliding. The specially designed brackets reinforce the chassis frame and stiffen the caravan floor, providing significant local support for jacking.
  • Wide Selection: Load carrying capacity up to 1,000kg (mech.) / 1,500kg (hydr.)
  • Two versions are available, one for vehicles up to 1600 kg and one for 1601 kg - 2000 kg weight ranges
  • Can be retrofitted to caravans and trailers from 1980 onwards.
  • Kits include support brackets and all fixings and operating instructions.

Full details can be found in the catalogues:

to the catalogues

 

Technical data

Jack 800kgJack 1000kgjack
Static load capacity (kg)8001,000
Suitable for caravans with MTPLM of up to (kg)16002000
Weight (kg)4.25.5
Part Number2359771389235
Weight kg4.55.5

FAQ

No. Only the original AL-KO jack is specifically designed for this purpose and has perfectly adapted recesses that safely transfer the forces into the chassis, thereby preventing damage to the body. 
The special shape also prevents the jack from slipping, which can easily happen with standard jacks. You must never use corner steadies to jack. 

 

No. Only the AL-KO chassis is already designed for installation. From year of manufacture 1991 onwards, most chassis were already equipped with the corresponding mounting holes. In older chassis from 1980 it is also possible to have these installed. Please contact your nearest AL-KO service centre or your dealer.

 

Yes. The jack is available in two versions, with the smaller version only weighing just over 4kg yet having a static load capacity of 800 kg per wheel. Sufficient to lift a trailer with a total weight of up to 1600 kg.